Rated & peak power
5,000 W / VA rated output and 10,000 W / VA peak output.
All systems
DRIVELONG
EU SYSTEM
5,000 W · 3,430 Wh
5 kW mobile power for professional peak loads.
The EP5000iL combines 3,430 Wh LiFePO4 storage with 5,000 W / VA rated output, 10,000 W / VA peak output and configurable AC, PV and optional charging routes.
5.000 W3,430 Wh · 10,000 W peak
DRIVELONGEU SYSTEM
KEY POINTS
Designed for an energy profile that goes beyond the standard.
Protection & transfer
Unit IP53, battery pack IP66 and transfer time ≤10 ms.
AC, PV & optional charging
AC charging, 1,200 W PV input and driving/DC/wind charging are specified by configuration.
Parallel & EP3600B
Optional AC parallel for two matching EP5000iL units; EP3600B extra batteries are sold separately.
- Storage capacity
- 3.430 Wh
- Rated output
- 5,000 W / VA rated output
- Peak output
- 10,000 W / VA peak output
- Battery
- LiFePO₄ · 3,430 Wh · 67 Ah (51.2 V) · 5,000 cycles to ≥80% capacity
- Protection rating
- Unit IP53 · battery pack IP66
- Transfer time
- ≤10 ms
- Solar input
- 12–150 VDC · up to 1,200 W PV charging (about 3 h)
- Charging options
- AC: up to 3,000 W single-phase (about 1.2 h) or 1,700 W split-phase (about 2 h). Driving, DC and wind charging are optional
- AC output
- Pure sine wave · THD <3% · 50/60 Hz · single-phase 220/230/240 V or split-phase 100/200, 110/220 or 120/240 V
- DC & USB outputs
- XT90 12 V/30 A · cigarette port 12 V/10 A · 2× 5521 12 V/6 A · USB/QC3.0/2× USB-C PD140W · 2× wireless 5–15 W
- Parallel & battery expansion
- Optional AC parallel: 2 EP5000iL units with matching rated voltage/frequency, max. 10 kW. EP3600B: 3,430 Wh; up to 31 units (source: total 109 kWh)
- Dimensions
- 555 × 430 × 420 mm
- Weight
- 50 kg
PRACTICAL RUNTIME
How long can this system run as an indication?
Add the equipment you intend to use. The calculator totals the output and uses your simultaneous-use factor plus a 15% practical energy reserve.
Equipment list
Enter each device’s rated power draw in watts.
Common starting valuesIndicative values: always check your own equipment’s rating plate and any start-up peak.
Add at least one device with an output to see an indication.
Indication only, not a guarantee. Actual runtime depends on load profile, temperature, state of charge, connections and charging opportunities.
Discuss this loadAPPLICATIONS
Built for the reality on site.
Every installation starts with the work that must keep running. That is why we look beyond wattage alone.
Discuss your applicationPower planning. Review peak load, connections and runtime in advance.
Charging strategy. Combine grid charging, solar and mobile charging options where appropriate.
Continuity. Choose a setup that fits your critical power requirement.
PRODUCT IN CONTEXT
